Kyoritsu 6010B User Manual download pdf (Page 4)

―

returned to your distributor for attention.

14. Do not operate the function switch while the instrument is connected to a

circuit. If, for example, the instrument has just completed a continuity test

and an insulation test is to follow, disconnect the test leads from the circuit

before moving the function switch.

15. Do not rotate function switch when test button is depressed. If the function

switch is inadvertently moved to a new function when the test button is

depressed or in lock-down position the test in progress will be halted. To

reset, release test button and press again to restart testing on new function.

16. THE WIRING CHECK LED (P-E, P-N) of this instrument is to protect the user

from electrical shock resulting from incorrect connection of Line and Neutral

or Line and Earth.When the Neutral and Earth conductors are incorrectly

wired, the WIRING CHECK LED function cannot identify the incorrect

connection. Other procedures and test must be conducted to check and

confirm that the wiring is correct prior to making measurement. Do not use

this instrument to check the correct wiring of the power supply. Kyoritsu will

not be held liable for any accident that may result from incorrect wiring of

the power supply line.

17. Use a damp cloth and detergent for cleaning the instrument. Do not use

abrasives or solvents.

CAT.Ⅲ

Caution, risk of electric

shock

Protection against wrong

connection is up to 440V

Caution (refer to accompanying

instruction manual)

Earth Ground

protected throughout by DOUBLE INSULATION or REINFORCED

INSULATION

Designed to protect against transient overvoltages in a building

wiring installation (low-voltage distribution level)

Symbols used on the instrument

1 2 3 4 5 6 7 8 9 ... 35 36

No comments

Kyoritsu 6010B User Manual Page 4