Kyoritsu 6010B User Manual download pdf (Page 33)

―

10. BATTERY / FUSE REPLACEMENT

WARNING

NEVR OPEN THE BATTERY COVER WHILE MAKING MEASUREMENT.

TO AVOID POSSIBLE ELECTRICAL SHOCK, DISCONNECT THE TEST

LEAD AND POWER OFF THE INSTRUMENT BEFORE OPENING THE

BATTERY COVER FOR BATTERY OR FUSE REPLACEMENT.

10.1 Battery replacement

When the display shows the low battery indication " ", disconnect the test

leads from the instrument and power off. Remove the battery cover and the

batteries. Replace with eight (8) new 1.5V R6P or LR6 batteries, taking care to

observe correct polarity. Replace the battery cover.

10.2 Fuse replacement

The Continuity test circuit is protected by a 600V 0.5A HRC ceramic type fuse

situated in the battery compartment, together with a spare. If the instrument fails

to operate in the Continuity test mode, first disconnect the test leads from the

instrument and power off. Next remove the battery cover, take out the fuse and

test its Continuity with another continuity tester. If it has failed, replace it with a

spare, before refitting the battery cover. Do not forget to obtain a new fuse and

place it in the spare position.

Fig 15

Battery Cover

Batteries

Screw

Spare Fuse

Fuse

1 2 ... 28 29 30 31 32 33 34 35 36

No comments

Kyoritsu 6010B User Manual Page 33