Kyoritsu 6010A User Manual download pdf (Page 11)

―

4. CONTINUITY（RESISTANCE）TESTS

WARNING

ENSURE THAT CIRCUITS TO BE TESTED ARE NOT LIVE.

DISCONNECT THE INSTRUMENT FROM THE CIRCUIT UNDER TEST

BEFORE OPERATING THE FUNCTION SWITCH.

TO SELECT THE LOW RESISTANCE RANGE SELECT“CONTINUITY”

4．1 Instrument layout See Fig 1.

4．2 Resistance of test leads

The object of testing is to measure the resistance of parts of the wiring system

alone,and this should not include the resistance of any test leads used.The

procedure is to measure the resistance of the test leads and to subtract this

from the instrument reading which includes the lead resistance.Proceed as

follows:-

1．Press the test button once. Then, the instrument switches on.

2．Connect the ends of the test leads in use firmly together（see Fig２）and

operate the test button.

3．The display will read the resistance of the test leads,and a careful note

should be made of the reading.

Fig 2

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

No comments

Kyoritsu 6010A User Manual Page 11