Kyoritsu 1012 User Manual Page 1

KEW 1012オートレンジ デジタル マルチメータ・AUTO RANGE DIGITAL MULTIMETERKYORITSU ELECTRICAL INSTRUMENTSWORKS,LTD.,取扱説明書INSTRUCTION MANUAL

―20―7. How to use Function Switches7-1 SELECT KeyThis key is to chose the measuring function at Ω/ Diode Check/ Continuity/ function and Current func

―21―8. Auto Power OffAuto power off function operates when about 15minutes passed after power on this instrument.When Auto power off function operates

保 証 書共立製品をお買い上げいただきありがとうございます。保証期間内に通常のお取扱いで万一故障が生じた場合は、保証規定により無償で修理いたします。本書を添付の上ご依頼ください。お名前ご住所 〒お電話番号  （ ）−（ ）−（ ）◎保証規定をよくお読みください。◎本保証書は日本国内でのみ有効です。◎

―12―1. Safety WarningsThis instrument has been designed, manufactured and tested according to the following standards.IEC 61010-1 Measurement CAT.Ⅲ 30

―13―CAUTION● Always make sure to check the Function Selector Switch is setting to the appropriate range before starting measurement.● Do not expose th

―14―6.000A10.00A600.0μA6000μA60.00mA600.0mA6.000A10.00A600.0Ω6.000kΩ60.00kΩ600.0kΩ6.000MΩ60.00MΩＡＣＡResistanceΩ±1.5%rdg±5dgt (50 / 60Hz)±1.8%rdg±5dgt (

● Standards IEC61010-1 Measurement CAT.Ⅲ 300V, pollution degree 2 / Measurement CAT.Ⅱ 600V, pollution degree 2IEC61010-031IEC61326● Mode of operation

―16―5. Preparation5-1 Checking Battery VoltageSet the Function Selector Switch to other positions except the OFF position.Battery Voltage is enough if

(2) Set the Function Selector Switch to " " position.(Then, "AC", "Auto", and "V" symbols are indicated on the

(5) Connect the test leads to the circuit under test so the instrument is in the series.(6) Power on the circuit under test.(7) Measured value is indi

(Then, " " and "Ω" symbols are indicated on the display.)Make sure that the "OL." symbol is indicated on the display at