Kyoritsu 2009R User Manual download pdf (Page 21)

③ Connect the tip of the red and black test leads to the circuit

under test and take the reading on the display.

NOTE

● When the voltage under test measures 3% of the range or less,

or the frequency of the voltage is low, "LoHz" is indicated on

the display.

６－５ Resistance Measurement

 DANGER

●Never use the instrument on an energized circuit.

● Do not make measurement with the battery compartment cover

removed.

● Keep your fingers and hands behind the barrier during

measurement.

①Set the function selector switch to the "

Ω" position.

② Slide the terminal cover to the left to disclose the V/Ω and COM

terminals. Plug the red test lead into the V/Ω terminal and the

black test lead into the COM terminal.

③ With the tip of the test leads shorted together, press the Zero

Adjust/Reset button to offset the resistance of the test leads.

④ Connect the tip of the test leads to the circuit under test and

take the reading on

the display.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 32 33

No comments

Kyoritsu 2009R User Manual Page 21