Kyoritsu 1011 User Manual

KEW 1011オートレンジ デジタル マルチメータ・AUTO RANGE DIGITAL MULTIMETERKYORITSU ELECTRICAL INSTRUMENTSWORKS,LTD.,取扱説明書INSTRUCTION MANUAL

―20―7. How to use Function Switches7-1 SELECT KeyThis key is to chose the measuring function at Ω/ Diode Check/ Continuity/ Capacitance function and

―21―8. Auto Power OffAuto power off function operates when about 15minutes passed after power on this instrument.When Auto power off function operates

保 証 書共立製品をお買い上げいただきありがとうございます。保証期間内に通常のお取扱いで万一故障が生じた場合は、保証規定により無償で修理いたします。本書を添付の上ご依頼ください。お名前ご住所 〒お電話番号  （ ）−（ ）−（ ）◎保証規定をよくお読みください。◎本保証書は日本国内でのみ有効です。◎

―12―1. Safety WarningsThis instrument has been designed, manufactured and tested according to the following standards.IEC 61010-1 Measurement CAT.Ⅲ 30

―13―CAUTION● Always make sure to check the Function Selector Switch is setting to the appropriate range before starting measurement.● Do not expose th

―14―6.000A10.00A600.0μA6000μA60.00mA600.0mA6.000A10.00A600.0Ω6.000kΩ60.00kΩ600.0kΩ6.000MΩ60.00MΩＡＣＡResistanceΩ±1.0%rdg±3dgt (50 / 60Hz)±1.2%rdg±3dgt (

―15―● Standards IEC61010-1 Measurement CAT.Ⅲ 300V, pollution degree 2 / Measurement CAT.Ⅱ 600V, pollution degree 2IEC61010-031IEC61326● Mode of operat

―16―5. Preparation5-1 Checking Battery VoltageSet the Function Selector Switch to other positions except the OFF position.Battery Voltage is enough if

―17―Measured value is indicated on the display.Note) When you make measurement of the voltage less than 0.1V at the AC6V range, the measurement value

―18―6-2-4 AC Current Measurement (up to 10A)CAUTION● For safety sake, the measuring time on 10A range should be 15 seconds or less. Interval time bet

―19―Make sure that the "OL." symbol is indicated on the display at this bout, then short the test lead tips and check "0" is indic